Bathroom Drywall

Well, with my wife’s cancer health scare behind us, and my health being more reasonable these days, I am starting to work in things again.

I managed to drywall the hole in my bathroom wall from the HVAC install months and months ago. I was pretty intimidated by the idea of drywall work, but I watched a few YouTube videos, and got the strapping in and the drywall up.

Drywall hung and first bit of joint compound added. I used a brown construction paper to shield the other side.

It was actually easier than expected. What really helped is I own a multitool and was able to cut the old drywall back to where it made sense and could allow me to drill the new stuff into the studs. I made sure to use the natural clean edges of the drywall to where they hit the opening. I used 150 grit sandpaper between to just knock things flat. I am inexperienced so it was easier to build it up and then sand it down. The 150 grit made it quick work, and I was ready in minutes. Clean up was a bit messy, but fine.

I also used Fibafuze instead of paper tape. It’s a fiberglass tape. It was so easy to work with, but I recommend gloves because of the glass bits in the fiberglass. I used duct tape to get all the splinters out of my fingers after. I just stuck the tape to my skin where I felt it, and eventually it lifted them out. Despite that oversight, I would use fibafuze again. It make really easy smooth joints.

Finished joints in the drywall with an orange peel texture over it. There really isn’t any lines between the new and old, but the camera seems to think there is.

I used the same orange peel texture that is over every wall in the house, and it disguises my imperfections. It’s all done, and ready for paint.

I thought I had a bit of leftover paint from the previous owner, but it was a solid puck of acrylic when I opened it. Apparently 2.5 years have gone by since we bought the place, and time does that.

I probably won’t paint until we get the mirror area fixed above the sink. This place was built for a very short elderly lady, so the vanity mirror is very low. I am 5’6″ tall and I am at the very top of the mirror. My 6’2″ wife has to stoop to see herself.

What’s stopping me is the lighting is also right on top the vanity mirror. I need to get an electrician to move the light upwards towards the ceiling because I just don’t fuck with electrical. I have a quote for $454 to move it up where it should go by the ceiling. I’ll pay it just to not fuck with electrical.

Then I will have to rebuild the vanity, and I can install a sink cabinet that isn’t so low my wife has to bend over.

That’s a long way to say I’m not painting and finishing the wall right now.

All in all, though, I feel like I conquered drywall. Am I an expert? No. Can I do it well enough to be happy about it? Absolutely! Even better, I have enough leftovers I can patch anything that comes up now and not have to worry about it. Having the tools on hand really makes a difference.